Novice decoration guide acceptance standards for w

2022-07-22
  • Detail

Novice decoration guide: acceptance standards for wall tiles and floor tiles

acceptance standards for wall tiles

the unevenness requirements for stone tiles and tiles are ± 1mm, the hollowing rate is 0.5%, and all internal and external corners rely on the square

floor tiles

1 Treat the original base course

2. Cement + sand + interface agent paste. Grinding edges and corners of tiles

acceptance standard for floor tiles

the unevenness of the pasted stones and tiles requires that the lines are flat and uniform, the hollowing rate is 0.5%, all the internal and external corners rely on the square, and the brick joints are small. The floor tiles should be knocked one by one 12 hours after paving, and a brick with more than 3/4 hollowing must be reworked

special attention: check the toilet floor drain, and check whether the water flows to the floor drain during the drainage time

上海胎记疤痕医院

昆明男科医院

上海男科医院

成都精神医院

Copyright © 2011 JIN SHI